HELP!!!!!!!!!!!!!!
Moderators: MtnViewJohn, chris, mtnviewmark
HELP!!!!!!!!!!!!!!
OK i downloaded the program last night after seeing it on Attack of the Show on g4. i've been fiddling around with it all night and just ended up confusing myself more. i can go in and edit the example shapes and create something different but if i go to new and type in:
startshape SQUARE
rule SQUARE
{ x 1 s 12 }
it gives me an error message about the command line. what did i do wrong and how do i work this thing somebody please give me some detailed instructions?!?!
Sorry to seem like an idiot but please help
P.S. use simple terms
HELP!!!!!!!!!!!
thanks
startshape SQUARE
rule SQUARE
{ x 1 s 12 }
it gives me an error message about the command line. what did i do wrong and how do i work this thing somebody please give me some detailed instructions?!?!
Sorry to seem like an idiot but please help
P.S. use simple terms
HELP!!!!!!!!!!!
thanks
Re: HELP!!!!!!!!!!!!!!
Hi, guy.REALLY FRUATRATED wrote:startshape SQUARE
This means the program should start drawing SQUARE.
What's SQUARE ? It's a basic shape provided by Context Free. Just as CIRCLE.
That's why you can't redefine it, as you tried to do :
A line beginning with rule defines a new word. SQUARE and CIRCLE are already defined - thanks for themREALLY FRUATRATED wrote:rule SQUARE
{ x 1 s 12 }
Example :
Code: Select all
startshape SQUARE
Code: Select all
startshape anglesquare
rule anglesquare {
SQUARE { r 45 }
}
"anglesquare" did not mean anything before I defined it. And I defined it to be equal to SQUARE (already known), rotationed by 45°.
Code: Select all
startshape scene
rule scene {
anglesquare { }
CIRCLE { x 1 }
}
rule anglesquare {
SQUARE { r 45 }
}
Scene is an "anglesquare", defined after "scene", and a CIRCLE on the right, already known.
OK. I hope some light has been brought. Keep on reading the forums, and "work" on the example named lesson, provided with the program.
Cheers !
SIZE AND OTHER ADJUSTMENTS?
i got that much but when i enter size and location adjustmentssuch as:
startshape smallcircle
rule smallcircle{
CIRCLE { x -5 y 10 b -2 s 3}
}
nothing happens to the image.
again hate to look like an idiot but what am i doing wrong and how do i make it work
Also how ndo you creat a line
thanks again
startshape smallcircle
rule smallcircle{
CIRCLE { x -5 y 10 b -2 s 3}
}
nothing happens to the image.
again hate to look like an idiot but what am i doing wrong and how do i make it work
Also how ndo you creat a line
thanks again
Well...
The drawing area, the white paper sheet, automatically :
- centers on the content.
- shrinks to maximise the drawed picture
- expends so that some white space is left on the border (around as much as the width of the shape on the border... it's not clear, but look at my example below).
So, if you move or resize your single shape, the sheet will move and resize and the shape won't update. There's really no way to draw a circle at the left of the screen, for example. Except...
The drawing area, the white paper sheet, automatically :
- centers on the content.
- shrinks to maximise the drawed picture
- expends so that some white space is left on the border (around as much as the width of the shape on the border... it's not clear, but look at my example below).
So, if you move or resize your single shape, the sheet will move and resize and the shape won't update. There's really no way to draw a circle at the left of the screen, for example. Except...
Code: Select all
startshape left_i_said
rule left_i_said {
SQUARE { x -1 b 1 } // white and invisible ; replace -1 by -10 and see the effect
CIRCLE { } // haha I got you on the left
}
- MtnViewJohn
- Site Admin
- Posts: 882
- Joined: Fri May 06, 2005 2:26 pm
- Location: Mountain View, California
- Contact:
Setting the position using the x and y adjustments is only meaningful with respect to other shapes. The whole collection of shapes is always going to be scaled and centered to fill the screen. Try this:
Code: Select all
startshape smallcircle
rule smallcircle{
CIRCLE { s 3 b 1.0 } // invisible
CIRCLE { x -5 y 10 b -2 s 3}
}
As we say in French, "les Athéniens s'atteignent" (untranslatable pun).MtnViewJohn wrote:Code: Select all
startshape smallcircle rule smallcircle{ CIRCLE { s 3 b 1.0 } // invisible CIRCLE { x -5 y 10 b -2 s 3} }
vertical shapes
i have this input:
startshape bug
rule bug{
CIRCLE { size .25 x -.1 y -.1}
CIRCLE { x .1 y .1 s .35}
}
and i want to know how i would go about stacking the two circle either vertically or horizontally and also how once i complete the shape to just type in the startshape command and get the image that i just created
also is a line just a group of squares run together
startshape bug
rule bug{
CIRCLE { size .25 x -.1 y -.1}
CIRCLE { x .1 y .1 s .35}
}
and i want to know how i would go about stacking the two circle either vertically or horizontally and also how once i complete the shape to just type in the startshape command and get the image that i just created
also is a line just a group of squares run together
- MtnViewJohn
- Site Admin
- Posts: 882
- Joined: Fri May 06, 2005 2:26 pm
- Location: Mountain View, California
- Contact:
You could either creat new bug shapes with different x and y adjustments are you could take your existing bug shape and rotate it.
I don't understand your startshape question. When you are testing out shapes you just change the startshape line to reference the shape you want to test and click on Render.
Lines are just SQUAREs run together in Context Free v1.0. In Context Free v1.1 (coming soon) you can stretch a single SQUARE into a rectangle or a line.
I don't understand your startshape question. When you are testing out shapes you just change the startshape line to reference the shape you want to test and click on Render.
Lines are just SQUAREs run together in Context Free v1.0. In Context Free v1.1 (coming soon) you can stretch a single SQUARE into a rectangle or a line.
startshape
my startshape question is that if i create a square at a 45 degree angle and call it angle square can i just type in angle square on another document and get the square at a 456 degree angle or do i have to redefine it again for a new document
Typing it in every file needing the rule is the easiest way, yes.
Now, you can "include" files in others.
Look the "lesson" example : to draw letters, it does :
And then he can type
O_5by5 and others are defined in i_pix.cfdg, and draw letters.
This begins to be complicated. Here's a near complete discussion.
Now, you can "include" files in others.
Look the "lesson" example : to draw letters, it does :
Code: Select all
include i_pix.cfdg
Code: Select all
rule TITLE1 {
O_5by5 { x 0 }
N_5by5 { x 1.2 }
E_5by5 { x 2.4 }
}
This begins to be complicated. Here's a near complete discussion.
Yet somehow we all figured it out. I agree that there should be a help file, but the program is not all that hard to figure out if you're at all used to seeing code. Try looking at the example named 'lesson.'Anonymous wrote:This is the stupidest program I have ever seen. There is no help file and there is no way in hell to know what the shit you are doing.
HELP!!!!!!!!!!!!!!
Ok.. I get the concept that if you are use to starring at code you can get it. But what about the ones that are code challenged.. meaning that we don't code anything.
I guess we that do not code are doomed to delete the program and just stick with the easy breezey programs out there and use the little mouse and draw our shapes and pictures.
I was hoping this was something a ditz could use. Well so much for that. Some of us do not know how to code or even what the heck this is.. to us this is as hard as learning a new language to speak to your long long long long cousin when you don't speak their language.
oh well.
I guess we that do not code are doomed to delete the program and just stick with the easy breezey programs out there and use the little mouse and draw our shapes and pictures.
I was hoping this was something a ditz could use. Well so much for that. Some of us do not know how to code or even what the heck this is.. to us this is as hard as learning a new language to speak to your long long long long cousin when you don't speak their language.
oh well.